drain cleaning

Drain Contractors: Understanding Septic System Inspection

According to drain contractors, the septic system is one of the most important systems if you live in rural areas or in areas that aren’t covered by the municipal sewer line. One of the most effective ways of maintaining the system is by undertaking regular inspections.

Types of septic system inspections

There are mainly two types of inspections that you can perform to your system: visual and full inspection. Visual inspection is done by a home inspector. During the inspection, the professional goes through all the toilets to ensure that they flush and there aren’t visible leaks.

Here, the professional doesn’t open up the septic tank. Due to this, the inspections are limited. As a result, you are unable to detect any major problems that your system might be having. This means that you don’t fix any of the major issues that your system might be having.

From its name, the full inspection is more complete. During the inspection, you open up the septic tank and try to identify even the most minor issue that might be there.

The inspection professional digs four holes, one on each end of the tank and two in the absorption area. If any water is detected in the holes, you need to maintain the system. The role of the two holes that the professional digs up in the absorption area is to allow inspection of the stones.

In the event you notice a discoloration of the stones, it means that your system is failing and you need to repair it. If the damage is extensive, you will have to replace it.

The inspection also involves the inspection of the fluid level of the tank. This is to ensure that the tank isn’t leaking or overfull. If the water level is normal, most of the professionals introduce water to ensure that it’s flowing properly. The contractors ensure that the water is flowing properly from the house to the tank or from the tank to the absorption area.

Finally, the contractors check the flow of water from the house to the tank and ensure that everything is properly connected and there are no blockages.

Once the contractors have undertaken septic tank inspection, they make a detailed report about the condition of the septic system, make the necessary septic system diagram with the measurements, and make recommendations of the necessary repairs and maintenance.

What should you expect during the inspection?

In addition to the above-mentioned steps, you also should expect the professionals to pump out the entire tank during the inspection. The only situation when the professionals won’t pump out the tank is when you have a recently pumped out tank that is clean without any solids.

You also should expect the contractor to ask a number of questions during the inspection. In most cases, the questions surround the usage of the tank. How you have been using the tank, how you have been maintaining it, among many other questions.

Why should you inspect your septic system?

There are plenty of benefits that come with inspecting your septic system. These benefits include:

Promoting better performance: It’s obvious that when you inspect your system regularly you are able to identify even the most minor issues as early as possible. This keeps your system functioning optimally.

During the inspection, when the contractors identify even the minutest problem, they fix it which prevents permanent damage to your system. As you might expect, when there is no damage to your system, the system runs better which increases its lifespan.

You avoid emergencies: When you schedule regular inspections you are able to catch sewer problems before they get worse. Of course, many contractors will fix them before they lead to an emergency. In addition to this giving you peace of mind as you know that your system can’t grind to a halt, it also saves you money as you don’t have to hire an expensive sewer professional to fix a problem in the middle of the night.

You understand the system better: When you regularly open up the system, you understand it better. You know all the parts, their weakness levels, how often you should pump out the tank, among many other things. For you to get the most from the practice, you should hire experienced drain cleaning services providers to help you out.

Read More »

Easiest ways to clear clogged drains

Of course, we have all seen the warning signs of clogged drains. We observe the sink is taking far more longer to clear out the water. At the same time, you can notice that the water is pooling in the shower. And you can sense all sorts of unpleasant and strange odours. Chances are that you may want to get drain pipe inspection with camera right away.

However, just hold on a second. There is not always a need to call professional services if the problem is smaller.

Of course, if the clog is bigger and does not clear away by home remedies, then it is time to take the help of a professional company. But if you can certainly clear the clog without spending a significant amount of money, then let it be that way.

The easiest ways to clear drain blockage

To help you out with that, we have included the easiest ways to clear clogs in the drain pipes. So, what are you waiting for? Start following these tricks and see the differences today!

Bent wire

This is perhaps the most effective and common method of clearing the pipe blockage. Furthermore, it is also quite effective. All that you need is a regular coat hanger that is made of a wire.

Next, just straighten the wire as much as possible. Then push it past the drain hold and after that the process is quite easy. Now just start to fish the gunk out.

When you pull the wire out, chances are that you will get various types of nasty things out of the drain. This may include clogs of hair and build-up of grease. But once all this stuff is out, the water will start flowing through freely again.

Boiling Water

This is perhaps the simplest yet highly effective method of clearing the drains. In this process, all you need is a kettle and some water.

Just put some water to boil, and as soon as it boils, just turn off the switch and pour the boiling water down the drain.

Due to the heat of the water, many substances such as grease oils will begin to melt and then flow away. This will clear the gunk out and make it very easy for the water to flow freely again.

Now you might feel like this method is to easy and good to be true, it is what it is.

Vinegar and baking soda

This is one of the most classic and common methods of clearing blocked drains. Just start with one-third cup of baking soda along with a one-third vinegar in a cup. When you mix them both in a container, they will begin fizzing in no time at all.

As soon as the solution start fizzing, do not waste any time and pour it in the drain pipe. Due to the fizzing action, the grime and gunk build up will get cleared away.

Let this solution sit in the drain pipe overnight or at least a few hours. Finally, flush the whole drain pipe with the use of hot and boiling water.


All the above mentioned three methods are highly suitable for drain pipes. Furthermore, these methods work both for bathroom and kitchen sinks. If the situation seems to be worse or much bigger, then we suggest you talk to a drain contractor right away.

In this regard, do not hesitate to reach to local drain cleaning companies Westchester and discuss your case. After you have discussed your case, the drain cleaners will give you a quote based on your case and unique requirements of cleaning.

Read More »