When you looking to fall a tree you should note that there are plenty of dangers that the practice comes with. Due to this, it’s always wise that you hire tree cutting services providers to help you out.
If you feel that you can cut the tree by yourself, you should go ahead and do it, but be cautious of the dangers that it comes with. Some of the things you should be on the lookout for include:
Staying too close to the tree
This is common with people that are used to cutting trees. When they are cutting the tree, they stay too close to it. I don’t know if it’s because they feel they are well acquainted with the trees.
Whatever the reason, you should know that it’s very dangerous to stay too close to the tree especially when it’s in the blink of coming down.
According to tree experts, the danger zone of a standing tree is the circle around the center of the stump. You also should avoid standing or being close to a distance that is within two-lengths of the tree you are bringing down.
This is because you are at high risk of getting hit by the falling tree. The tree can also hit you as it hits the ground.
For you to be on the safe side you should ensure that you are as far away from the tree as much as possible.
Failing to protect your ears
You use chainsaws to bring down the trees. As you might know, the machines are noisy, which is harmful to your ears. One of the mistakes you can make is to cut the trees without wearing the right hearing protection.
There are plenty of ear protectors in the market that you can go with. There are headphones, earplugs, and other units that you can use. For you to get the most from them, ensure that they are of high quality.
For the units to last for a long time, you need to properly maintain them. This calls for you to clean them regularly. You also should avoid dropping them hence putting them at the risk of breaking.
When you cut the trees without protecting your ears, you put yourself at the risk of suffering from noise-induced hearing loss.
Getting hit by broken limbs or top
Broken limbs or tops caught in the branches of a standing tree might be hidden from sight. In the event they are dislodged as the tree starts moving, they can hit you. The key to avoiding the accident from coming about is to be extra cautious when cutting the tree.
If you notice a broken limb, you should come up with a way of managing it. If possible, use a machine to dislodge the hazard. Another highly effective way of curbing the issue is driving the hazard with another tree.
Incorrect or poor tree felling technique
There is a lot of risks that come when you lose control and end up making an incorrect cut. You are bound to make these mistakes when:
- You don’t properly asses the tree
- You don’t properly clear the area around the tree
- You don’t leave an adequate escape route in the event of an emergency
- You over-cut the scarf
- You stand in the wrong position when putting in the back cut
- When the tree is falling, you don’t retreat far enough
- Walking directly behind the falling tree
- Continuing to make the back cut even after the tree has started to fall
For you to avoid this risk you should undertake a thorough assessment of the tree. Are you experienced enough to effectively bring down a large tree? If you aren’t, consider hiring a competent faller to help you out. Ensure that the faller has the necessary qualifications to complete the task.
You also should ensure that you use the right tree cutting tools.
Cutting dead trees
Another danger that comes about is cutting a dead tree. Broken, dead, or rotten trees are unpredictable and very dangerous when you don’t handle them properly. Dead trees can fall in any direction without warning. They also might break up as they are falling.
To protect yourself, ensure that you have cut down a dead tree before you even begin cutting the others. Carefully go around the area and confirm if there are any dead trees that might put your life in danger.
Getting struck from behind by a tree
This has resulted in plenty of serious injuries. You can be struck by a tree from behind due to various reasons. One of the reasons is the vibration of the large tree hitting the ground might be enough to cause a dead or unstable tree to fall.
As you are removing a tree that is sheltering an unstable tree, you might expose it to the wind causing it to fall.
To avoid hurting yourself you should leave enough room between you and the tree. Always stay as far away from the tree as much as possible.
The danger of the hung-up tree
A hung-up tree is a cut-up, uprooted, withdrawn, or pushed over a tree that is caught or stuck against another tree thus preventing it from falling to the ground. Tree removal companies Chevy Chase advice against ever working under a hung-up tree. When you notice a hung-up tree, get rid of it as soon as possible.Read More »